Victrex? PEEK 600G Polyetheretherketone

Victrex? PEEK 600G Polyetheretherketone 物性表: Victrex? PEEK 600G Polyetheretherketone物性表及特性介紹,Victrex? PEEK 600G Polyetheretherketone注塑參數詳情,如需Victrex? PEEK 600G Polyetheretherketone下載, 可到相關下載區下載
  • 密度 [g/cm3]: 1.26
  • 吸水率 [%]: 0.4
  • 缺口沖擊強度: 9.5
  • 拉伸強度 [MPa]: 95.0
  • 彎曲模量 [MPa]: 4.10
 
Physical PropertiesMetricEnglishComments
Density 1.26 g/cc0.0455 lb/in3Amorphous; ISO 1183
 1.30 g/cc0.0470 lb/in3Crystalline; ISO 1183
Water Absorption 0.40 %0.40 %by immersion; ISO 62-1
 0.070 %
@Time 86400 sec
0.070 %
@Time 24.0 hour
3.2 mm thick Tensile bar; ISO 62-1
Viscosity 500000 cP
@Temperature 400 °C
500000 cP
@Temperature 752 °F
Melt; ISO 11443
Linear Mold Shrinkage, Flow 0.010 cm/cm0.010 in/in390°C nozzle, 200°C tool; ISO 294-4
Linear Mold Shrinkage, Transverse 0.013 cm/cm0.013 in/in390°C nozzle, 200°C tool; ISO 294-4
Spiral Flow 850 cm
@Thickness 1.00 mm
335 in
@Thickness 0.0394 in
390°C nozzle, 200°C tool; Victrex
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 95.0 MPa13800 psiISO 527
Elongation at Break 45 %45 %ISO 527
Tensile Modulus 3.70 GPa537 ksiISO 527
Flexural Strength  12.0 MPa
@Temperature 275 °C
1740 psi
@Temperature 527 °F
Result based on 450G; ISO 178
 17.0 MPa
@Temperature 175 °C
2470 psi
@Temperature 347 °F
Result based on 450G; ISO 178
 80.0 MPa
@Temperature 125 °C
11600 psi
@Temperature 257 °F
Result based on 450G; ISO 178
 155 MPa
@Temperature 23.0 °C
22500 psi
@Temperature 73.4 °F
ISO 178
Flexural Modulus 4.10 GPa595 ksiISO 178
Compressive Strength  70.0 MPa
@Temperature 120 °C
10200 psi
@Temperature 248 °F
Result based on 450G; ISO 604
 120 MPa
@Temperature 23.0 °C
17400 psi
@Temperature 73.4 °F
Result based on 450G; ISO 604
Izod Impact, Notched (ISO) 9.50 kJ/m24.52 ft-lb/in2ISO 180/A
Izod Impact, Unnotched (ISO) NBNBISO 180/U
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity  1.00e+9 ohm-cm
@Temperature 275 °C
1.00e+9 ohm-cm
@Temperature 527 °F
Result based on 450G
 1.00e+15 ohm-cm
@Temperature 125 °C
1.00e+15 ohm-cm
@Temperature 257 °F
Result based on 450G
 1.00e+16 ohm-cm
@Temperature 23.0 °C
1.00e+16 ohm-cm
@Temperature 73.4 °F
Result based on 450G
Dielectric Constant  3.2
@Frequency 50000 Hz,
Temperature 23.0 °C
3.2
@Frequency 50000 Hz,
Temperature 73.4 °F
Result based on 450G
 4.5
@Frequency 50000 Hz,
Temperature 200 °C
4.5
@Frequency 50000 Hz,
Temperature 392 °F
Result based on 450G
Dielectric Strength 16.0 kV/mm
@Thickness 2.50 mm
406 kV/in
@Thickness 0.0984 in
Result based on 450G; IEC 60243-1
Dissipation Factor 0.0030
@Frequency 1.00e+6 Hz
0.0030
@Frequency 1.00e+6 Hz
Result based on 450G; IEC 60250
Comparative Tracking Index 150 V150 VResult based on 450G; IEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 35.0 μm/m-°C19.4 μin/in-°FAlong flow below Tg, Result based on 450G; ISO 11359
 150 μm/m-°C83.3 μin/in-°FAlong flow above Tg, Result based on 450G; ISO 11359
CTE, linear, Transverse to Flow 55.0 μm/m-°C30.6 μin/in-°FAverage below Tg, Result based on 450G; ISO 11359
 140 μm/m-°C77.8 μin/in-°FAverage above Tg, Result based on 450G; ISO 11359
Specific Heat Capacity 2.20 J/g-°C0.526 BTU/lb-°FDSC
Thermal Conductivity 0.290 W/m-K2.01 BTU-in/hr-ft2-°FISO/CD 22007-4
Melting Point 343 °C649 °FISO 11357
Deflection Temperature at 1.8 MPa (264 psi) 152 °C306 °FResult based on 450G; ISO 75-f
Glass Transition Temp, Tg 143 °C289 °FOnset; ISO 11357
 
Processing PropertiesMetricEnglishComments
Processing Temperature <= 100 °C<= 212 °FHopper Temperature
Nozzle Temperature 390 °C734 °F
Zone 1 370 °C698 °F
Zone 2 375 °C707 °F
Zone 3 380 °C716 °F
Zone 4 385 °C725 °F
Mold Temperature 190 - 220 °C374 - 428 °F
 <= 250 °C<= 482 °F
Dry Time  3 hour
@Temperature 150 °C
3 hour
@Temperature 302 °F
 5 hour
@Temperature 120 °C
5 hour
@Temperature 248 °F
 
Descriptive Properties
ColorNatural/Beige
Gate> 1mm or 0.5 x part thickness
RunnerDie/nozzle > 3mm, manifold > 3.5mm

轉載請注明: 轉自中國塑膠原料之家 http://www.sgwanshunchem.com/wuxingbiao/

本文鏈接: http://www.sgwanshunchem.com/yuanliaoku/show-50415.html

免責聲明: 本文 Victrex? PEEK 600G Polyetheretherketone 僅代表作者個人觀點,中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容,其版權均由原作者和資料提供方所擁有!如因作品版權問題需要處理,請與我們聯絡

塑膠原料之家,專業塑料網站、原料報價網站,免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。

2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家

滬ICP備15027283號-4

她的小梨涡txt百度网盘下载